We all know that middle tab on a vintage Star Wars Millennium Falcon ramp - very fragile, and often broken. This listing is for a 3D printed replacement tab for the Falcon ramp. No ramp or any other vintage part is included, just the repair tab. You can see a video of the installation here: https://youtu.be/ZPEX6UIOVss Essentially: you just glue it in place. A good bond and a good glue is important - it takes a bit of pressure to install the ramp after the repair tab is put in - if you don't have a good bond, you may need to re-glue! No different than the original tab - which is why it is so often broken. Don't be stingy with the glue, and make sure to let it cure for the manufacturer's recommended timeframe. I highly recommend Plastruct Plastic-Weld. If there is any remaining bit of the original tab interfering with the repair tab sitting flat, you will need to either file/sand/cut the remnant down. Please dry fit the tab to make sure you know proper placement and that it sits well in the space before you glue it. There are at least two different molds for the Falcon ramp, one that has a little support bar at the middle tab, and one that doesn't (see pic). This repair tab will work for either. About 3D printed parts - they may have minor imperfections or visual defects from the printing process. These do not impact the function of the parts. I combine shipping on items. Order multiple of this item, and it will automatically combine. Request an invoice when purchasing different items to get the combined total. Visit my eBay store for other hard to find vintage Star Wars parts, repair kits, and vehicle wall mounting hangers! About Galactic Collector: I am a collector of vintage Star Wars action figures, vehicles, and playsets. I regularly restore vintage pieces. I never part out complete items. I often buy broken/damaged/parts lots for salvage, and will resell leftover parts from those to hopefully benefit other restorers out there.