1-Phase Buck/Boost Prewired Step-Down Transformer - 240V Primary - 208V Secondary - 30 Amps - 50/60Hz The MPD-MT-BBT-240V-208V-30A-2X3FT-L6.30 Single Phase Step-Down Buck and Boost Transformer from Larson Electronics is powerful, reliable, and designed with the environment in mind. Suitable for both indoor and outdoor applications, the MPD-MT-BBT-240V-208V-30A-2X3FT-L6.30 provides increased reliability, higher efficiency, protection against critical equipment failures and an extra level of protection by isolating the power source from the connected device. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. The MPD-MT-BBT-240V-208V-30A-2X3FT-L6.30 is a prewired transformer for customer installation and is equipped with 3` of 8/3 SOOW cable on each side connected to the transformer with a 30 amp 250 V L6-30P twistlock plug on the primary side and a 30 amp 250 V L6-30C twistlock receptacle on the secondary side. Transformer Features: The MPD-MT-BBT-240V-208V-30A-2X3FT-L6.30 buck and boost transformer is a single phase unit with a 7.5 kVA rating and a primary voltage of 240 V using a maximum of 31.25 amps on the primary side. This step-down transformer has a secondary voltage of 208 V and provides up to 30 amps available on the secondary side. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The NEMA 3R painted steel enclosure makes the unit suitable for both indoor and outdoor applications, and this step-down transformer can be either floor or wall mounted. The MPD-MT-BBT-240V-208V-30A-2X3FT-L6.30 features a 180°C insulation with a 115°C temperature rise. Construction: The aluminum winding in the MPD-MT-BBT-240V-208V-30A-2X3FT-L6.30 are formed from high quality aluminum wire help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. Buck and boost transformers are designed to maximize the performance and life of electrical equipment. The MPD-MT-BBT-240V-208V-30A-2X3FT-L6.30 is encapsulated in silica sand and resin, and cased in a NEMA 3R steel enclosure. NEMA 4, NEMA 4X, and NEMA 12 enclosures are available upon request.